Download

 

Please use the links below to download the latest software and driver packages for your application.

PA Remote

Power Amplifier Remote is our remote client application which allows users to control our latest generation DSA Series Power Amplifiers via our proprietary RS485 interface card. The application is fully featured and free of cost. This application will interface with our Power Amplifier only via SYCO – USB CARD which offer 5000V galvanically isolated RS485 communication between the client’s PC and the Power Amplifier.

To determine which application version will work with your vibration system, please click the “HELP” menu on the touch screen display of your DSA Series Power Amplifier and verify the “SYSTEM VERSION”.

Phase Controller

Phase Controller is our primary application which allows users to control our Phase Control Unit via its USB 2.0 interface. The application is fully featured and free of cost. Users have the option to operate their system in three different modes. Mode 1 is Single Input and Single Output (SISO) wherein every system will have its dedicated Vibration Controller. Mode 2 is Multiple Input and Single Output (MISO) wherein a Vibration Controller will feed the same drive to multiple systems. Mode 3 is Multiple Input and Multiple Output (MIMO) wherein a MIMO Vibration Controller will feed a dedicated drive to each system. In Mode 1 (SISO), systems can be enabled or disabled in any combination. In Mode 2 & 3 (MISO & MIMO), either a combination of two system or all four systems can be enabled. In MISO or MIMO configuration, users can enable invert option for push-pull operation.

To determine which application version will work with your Phase Control Unit, please see the front panel of the unit for version number.

  • For 7 & 8
  • 7.1

 
 

 

No Comments

Comments are closed.